New Second Gen 018CHA CVT Transmission Valve Body Hydraulic Control Module for Chery Arrizo 5 PLUS Gearbox Replacement Parts

This brand-new second-generation 018CHA CVT hydraulic valve body is exclusively developed for Chery Arrizo 5 PLUS equipped with CVT180 continuously variable transmission, supporting two interchangeable OEM codes: 018CHA1502600 and 025CHA1506251.

The valve body is the core hydraulic command component of CVT180 gearbox. Long-term driving will lead to solenoid blockage, internal oil channel sludge accumulation and unstable hydraulic pressure, triggering vehicle jitter, acceleration lag, slipping and transmission fault light alarm. Our fully assembled valve body passes full-cycle hydraulic bench calibration, direct plug-and-play replacement for overseas repair shops without extra disassembly or matching work.

Warm Reminder: This second-generation 018CHA valve body only fits Chery Arrizo 5 PLUS with original CVT180 transmission, cannot interchange with first-gen 018CHA or other CVT models like 019CHA. Send your full 17-digit VIN code for free compatibility verification before bulk orders to avoid mismatching losses.

1. Raw Material Inspection: High-precision cast aluminum base, brand-new wear-resistant solenoid valves and oil-resistant sealing gaskets. All raw material batches pass high-low temperature aging test.
2. Precision Torque Assembly: Solenoids, plungers, pressure regulating valves and built-in filters are assembled with unified torque to eliminate assembly clearance deviation.
3. High-Pressure Internal Oil Channel Flushing: Special CVT oil flushes all internal pipelines to clear metal debris and prevent early clogging.
4. Full-Cycle Hydraulic Bench Calibration: Simulate low-speed creep, rapid acceleration and uphill heavy load to calibrate main oil pressure and lock-up pressure.
5. Final Circuit & Appearance Inspection: Check aluminum base for casting cracks, test solenoid plug conduction and confirm all sealing accessories intact.
6. Export Shockproof Packing: Each valve body wrapped with anti-rust film + customized shockproof foam + neutral carton, to protect solenoids and oil channels during long sea and air transportation.

• 1:1 OEM Hydraulic Layout, Direct Plug-and-Play

Aluminum base outline, oil port layout and solenoid plug positions are fully consistent with original OE valve body. Repair shops can replace the faulty unit directly without modifying transmission housing, greatly cutting overhaul labor time.

• Full Pre-Installed Internal Core Accessories

All solenoid valves, pressure plungers, built-in oil filter and complete sealing gaskets are pre-installed as a whole set. No extra solenoid repair kits or gaskets need to be purchased separately.

• 100% Full Hydraulic Bench Test Before Delivery, Low After-Sales Rate

Every finished valve body completes hundreds of pressure cycle calibration tests to stabilize hydraulic output, effectively solve CVT jitter, slipping and acceleration delay, adapting to high-temperature and bumpy overseas road conditions.

• Upgraded Second-Generation Anti-Clogging Oil Channel Design

Optimized internal pipeline flow path with high-precision built-in filter screen, reducing metal powder accumulation and lowering frequent valve body failure caused by dirty CVT oil.

• Flexible Wholesale & Customization Support

1 unit minimum trial order, tiered volume discount for bulk purchase, neutral blank carton and customer brand label printing service available. Negotiable warranty terms for long-term cooperative distributors.

1. Lift vehicle, drain all original CVT transmission fluid, remove oil pan and old internal filter;
2. Disconnect solenoid wiring harness plug of faulty valve body, remove all fixing bolts and take out the valve body entirely;
3. Clean the transmission mounting plane thoroughly to wipe metal sludge and residual old sealant;
4. Install new 018CHA valve body evenly, tighten bolts per factory torque standard and reconnect all wiring plugs;
5. Install new oil pan gasket and oil pan, refill dedicated CVT ATF oil, clear ECU fault codes and conduct road test to confirm smooth acceleration without jitter or pressure alarm.

Our factory specializes in brand new CVT/DCT transmission valve bodies, full gearbox assemblies and overhaul spare parts for Chinese domestic auto brands, covering Chery CVT180 018CHA series hydraulic control modules. We own independent standardized assembly workshop and full-load hydraulic pressure test benches, supplying fully-tested Chery transmission spare parts to domestic repair chains and overseas Chinese car aftermarket wholesalers. We offer factory-direct competitive price and professional English technical after-sales support.

Q1: Does the second-generation valve body share the same pressure regulating structure and oil pressure standard for high and low torque tuned CVT180 gearboxes?
A1: Our upgraded 018CHA second-gen valve body adopts unified pressure regulating structure and factory-calibrated oil pressure parameters, fully compatible with both high-torque and low-torque CVT180 versions of Chery Arrizo 5 PLUS. No adjustment or modification is needed during installation. Submit the complete 17-digit VIN before bulk orders for free compatibility check to avoid mismatching risks.

Q2: How many CVT & DCT valve bodies for domestic Chinese cars can your factory produce monthly? Can you sustain large continuous replenishment orders from overseas clients?
A2: Our factory runs multiple dedicated assembly lines with a stable monthly output of over 8,000 sets of various domestic CVT/DCT valve bodies. We maintain abundant raw material stock and flexible production scheduling to handle bulk recurring overseas orders year-round. We can prioritize your orders and guarantee consistent on-time delivery for long-term cooperative wholesalers.

Q3: Can we print our own auto parts brand logo and two OE codes on outer cartons? Is there any extra charge for customized printing and what is the standard?
A3: Custom printing of your brand logo and dual OE codes is available with a minimum order quantity of 100 units. A small extra printing fee will be charged based on your design draft and printing color types. For long-term bulk wholesalers with stable recurring orders, we can offer preferential printing cost to cut your overall procurement expense.