Remanufactured JF017E CVT Transmission RE0F10E Complete Gearbox Assembly for Nissan Teana Altima Murano X-Trail Infiniti QX60 2.5L 3.5L, Dyno Tested Rebuilt CVT8 Transmission

Our fully remanufactured JF017E (RE0F10E) CVT8 transmission assembly is a direct OEM replacement for Nissan & Infiniti 2.5L / 3.5L mid-size sedans and crossovers. Built with upgraded reinforced internal components to fix factory original weak points, every unit undergoes full dyno simulation testing before shipment to guarantee smooth shifting, stable hydraulic pressure and zero slipping. All worn original parts are replaced with brand-new OEM-standard spares, including steel drive chain, primary/secondary pulleys, upgraded valve body, full seal & gasket overhaul kit. Plug-and-play design, ready for direct installation. 12-month comprehensive global warranty included, ideal for auto repair shops, fleet maintenance and individual vehicle owners seeking cost-effective, long-lasting CVT replacement.

1. Full Disassembly & Ultrasonic Deep Cleaning All internal housings, shafts, pulleys, valve body and oil pump are fully stripped, sandblasted and ultrasonic cleaned to eliminate carbon sludge, metal debris and oxidation; every component measured with precision calipers to filter out out-of-tolerance worn hard parts.
2. Full Replacement of Consumable & Weak Components

• Brand-new reinforced steel drive chain (replace worn original chain prone to breakage)
• Refinished & precision-ground primary/secondary pulley set to eliminate pressure leakage and slipping
• Upgraded improved valve body + new stepper motor & pressure solenoids to fix slow response and shudder
• Complete overhaul kit: all seals, gaskets, O-rings, CVT filter, friction control plates
• Rebuilt oil pump with new vanes to maintain stable line pressure under heavy load
• New differential bearings, input/output shaft seals to prevent external fluid leakage

3. Factory Defect Correction Upgrade We install reinforced pressure accumulator springs and optimize internal oil circuit to lower high-temperature failure risk; matching OEM NS-3 CVT fluid circulation standard to avoid overheating during continuous driving or mountain towing.
4. 100% Full Dyno Load Testing Every finished JF017E CVT runs 40+ minutes real road simulation on professional transmission dyno machine. Technicians verify gear ratio switching, TCC lock-up performance, hydraulic pressure stability, noise level and reverse gear function. Only units passing all test metrics will be packaged for delivery, no untested cores shipped.
5. Direct Plug-and-Play OEM Fitment No modification required, perfectly matches original mounting points, wiring connectors and cooling pipe interfaces, compatible with both 2WD and AWD chassis.

Specs

• Model Number: JF017E / RE0F10E (CVT8 Chain CVT)
• Manufacturer: Jatco
• Max Torque Capacity: 280 N·m
• Drive Type: Front-wheel drive / All-wheel drive compatible
• Transmission Fluid Standard: Nissan NS-3 CVT Special Fluid
• Total Fill Volume: 12L (full overhaul fill)
• Gravity Oil Change Volume: 4.8–5.2L
• Core Structure: Steel push chain + dual variable pulleys + electronic hydraulic valve body control
• Simulated Gear Stage: 7-speed manual simulation

Full Compatible Vehicle List

Nissan Models

1. Nissan Teana L33 2013–2020 | 2.5L QR25DE / 3.5L VQ35DE
2. Nissan Altima L33/L34 2013–2023 | 2.5L / 3.5L
3. Nissan Murano Z52 2014–2024 | 2.5L / 3.5L
4. Nissan X-Trail T32 2015–2023 | 2.5L QR25DE
5. Nissan Pathfinder R52 2012–2021 | 3.5L V6
6. Nissan Maxima A36 2015–2023 | 3.5L V6
7. Nissan Qashqai J11 2013–2018 | 1.6L / 2.0L
8. Nissan Quest E52 / Elgrand E52

Infiniti Models

1. Infiniti JX35 2012–2013 | 3.5L V6
2. Infiniti QX60 L50 2013–2020 | 2.5L Hybrid / 3.5L V6

Mitsubishi 

• Mitsubishi Outlander 2.4L 2014–2020
• Latitude

• 12-month unlimited mileage global warranty from delivery date
• Warranty covers all internal remanufactured components (chain, pulleys, valve body, oil pump, differential)
• Exclusions: damage caused by improper installation, wrong CVT fluid use, collision, modification, overheating without external cooler

Common Original CVT Faults This Unit Fixes

• Acceleration slipping, RPM surging without speed gain
• Low-speed shudder, vibration at 60–120km/h
• Delayed D/R gear engagement, harsh gear switching
• P0846, P17F0, P0741 CVT pressure & lock-up error codes
• Metal grinding noise inside transmission
• Overheating warning light trigger under heavy driving

FAQ 

Q1: Is this remanufactured JF017E fully assembled and ready to install?

A: Yes. This is a complete full transmission assembly, pre-filled with protective anti-rust fluid, just install and add qualified NS-3 CVT fluid on site. All internal overhaul work is finished in our factory.

Q2: How to confirm if JF017E fits my car?

A: Send your vehicle VIN code, year, model and engine displacement to our sales team, we will double-check fitment for free before order confirmation. JF017E cannot interchange with JF011E, confirm model first to avoid wrong purchase.

Q3: What is the difference between remanufactured JF017E and used core transmission?

A: Used second-hand CVT units retain original worn internal parts with hidden wear risks. Our remanufactured units replace all vulnerable consumables with brand-new upgraded components, fully dyno tested and covered by formal warranty, more stable and cost-effective for long-term use.

Q4: Can I get bulk wholesale pricing for repair shop stock?

A: Yes, we support wholesale orders for auto parts distributors and repair garages. Contact our sales team for tiered bulk discount, mixed container shipment and custom labeling service.

Q5: How long is the production & shipping lead time?

A: Standard units are in stock, ship out within 3 working days after payment. Air freight takes 7–15 days, sea freight 25–45 days to most global ports.