Remanufactured JF017 CVT Transmission Assembly | For Nissan X-Trail T32 2.5L QR25DE Engine | Rebuilt JF017E Gearbox, Bench Tested, BULK Supply for Auto Repair Shops

1.Product Overview

This is a remanufactured JF017E CVT automatic transmission assembly for Nissan X-Trail 2.5L (T32 generation). Every unit is fully disassembled, cleaned, replaced with new wearing parts, reassembled and 100% bench-tested. The complete unit includes torque converter, ready for direct vehicle installation. We supply wholesale bulk orders for auto repair workshops, importers and auto spare parts distributors.

2.Fitment & Parameter Table

3.Inspection & Testing Standard

1. Full disassembly, sand blast cleaning for all housing and components
2. Replace all consumable parts: seals, gaskets, bearings, friction plates, steel plates, filter
3. Valve body inspection & calibration
4. 100% bench dynamometer test before packing: test pressure, shifting, oil leakage, noise
5. Each unit marked with unique serial number, test record saved, test video available upon bulk order request
6. Oil ports sealed with protective red caps to prevent dirt contamination

4.Core Competitive Advantages

• Professional remanufacturing workshop, focus on CVT gearbox for 10+ years
• Every gearbox 100% bench tested before delivery, no leakage & abnormal noise
• Wholesale price for bulk orders, stable stock capacity
• Full assembly with torque converter, ready to install
• Wooden export packing to avoid damage in sea/land transit
• After-sales technical support for installation troubleshooting

5.Professional Installation Guidance

1. Before installation: thoroughly clean vehicle cooling radiator and transmission oil pipeline. Old debris will damage new remanufactured CVT.
2. Use Nissan CVT special fluid only, do not mix different ATF oil types.
3. Torque converter must be fully seated into the transmission before mounting to engine.
4. After installation: fill oil, perform idle running, clear fault codes, run adaptive learning procedure.
5. Test drive and check for leaks, abnormal vibration or noise.

6.Packaging & Transportation

• Internal: foam shock protection, plastic oil port protective caps
• Outer: Export-grade solid plywood wooden crate
• Marking: product model, serial number, weight & dimension on crate
• Shipping: Support sea freight / air freight to global ports, can deliver to Moscow, Europe, North America. We can calculate freight cost for bulk orders.

7.Factory Strength Introduction

We are TRANSMESUN, professional manufacturer & supplier for remanufactured automatic transmissions and spare parts. Our factory has complete remanufacturing production line and professional dynamometer test benches. We serve global B2B clients: auto spare parts importers, wholesale dealers, large auto repair chains. We support long-term bulk cooperation and customized requirements.

8.FAQ

Q1: What’s the difference between your remanufactured JF017 unit and a basic rebuilt transmission from other suppliers?

A: Many competitors only replace broken parts for simple rebuilt gearboxes. Our JF017 remanufactured transmission follows strict OEM standard. We fully disassemble, ultrasonically clean the whole housing, replace most wearing internal components including CVT belt, pistons, all seals and friction plates with OEM new parts. Every finished assembly runs a full dynamic dyno test to check pressure, shifting performance and leakage. We are direct factory rather than traders. We keep complete test records for each unit, while most simple rebuilt products skip full bench testing and only replace failed parts, leading to much shorter service life and higher failure rate for your downstream repair shops.

Q2: Can this JF017 transmission fit both North American Nissan Rogue and Asia Pacific X-Trail T32? What checks do our buyers need to perform before ordering?

A: The JF017 RE0F10D CVT platform is shared by Nissan X-Trail T32 and North American Rogue 2.5L QR25DE engine, but there are subtle hardware differences for different regional versions. It can not be used directly just based on vehicle model name. Your customers must provide full VIN code and original transmission part number to us for pre-verification. Some regional variants have different sensor pin layouts and cooling port designs. We will cross-check all data before production to avoid mismatch. We suggest your wholesale team build a simple VIN checking checklist for your repair shop clients to reduce return risk.

Q3: What documents can you provide to help us clear customs in our country, and are there extra charges for issuing these export papers?

A: We can supply full standard export documents at no extra cost, including commercial invoice, detailed packing list, packing declaration, certificate of origin. If your customs requires, we can also provide product test reports, serial number record and fumigation certificate for wooden crates. We will mark correct HS code on all documents. All paperwork matches the actual goods. We can adjust the invoice value according to your reasonable customs requirement. There are no hidden fees for preparing these files. Our sales team will send scanned copies before shipment, and send original hard copies together with cargo or by express upon request.