Factory Remanufactured 5LK CVT Gearbox 20021-5LK-A00 Replacement Transmission for Honda Accord 2.4L 2WD 2013-2017 Bulk Wholesale for Auto Parts Importers & Distributors

Our remanufactured 5LK CVT continuously variable transmission is high-quality rebuilt replacement assembly for Honda Accord 2.4L two-wheel drive vehicles from 2013 to 2017. Each unit undergoes complete disassembly, component screening, replacement of worn consumable parts and precision reassembly. All finished gearboxes pass full dynamometer load testing to verify shift ratio performance, hydraulic pressure and sealing integrity. Designed specially for bulk wholesale for auto parts importers and distributors, with consistent batch quality for aftermarket resale.

• Complete disassembly and high-pressure cleaning of all metal components, removing carbon deposit and fine metal debris.
• Full inspection of pulleys, shafts and housing for cracks, wear and deformation; reject any unqualified parts.
• Replace all consumable components with OEM-new parts: CVT belt, pulley assembly, oil seals, bearings, solenoids and sensors.
• Reassemble following original Honda OEM torque values and assembly procedures strictly.
• Full dynamometer testing under simulated road load, verify ratio changing performance, pressure curve and zero oil leakage.
• Final leak test and batch quality audit before packing.

• Genuine transmission manufacturer without middleman markup, stable bulk supply capacity
• Wearable components upgraded with OEM-new parts, longer service life than standard rebuilt CVT
• Every transmission fully dyno tested; test reports available for bulk container orders 
• Remanufactured fully in accordance with Honda OEM factory standards
• In-house professional engineer team to resolve technical and aftersales issues for your end customers
• Multi-product supply solution: reman / brand new / used / aftermarket transmission assemblies and spare parts

1. Pre-installation inspection: Verify engine condition, fully flush transmission cooler and pipeline to eliminate residual metal debris, which is the top cause of repeated CVT failure.
2. Must use genuine Honda CVT fluid. Incorrect oil will scratch the pulley and damage the CVT belt rapidly.
3. After installation, use professional diagnostic scanner to perform CVT pressure reset and learning procedure.
4. Carry out road test, check for shudder, abnormal noise, slipping and fluid leakage.
5. Recommend CVT professional technician to finish installation; improper operation may damage transmission and void warranty.

Packed in fumigated export wooden crate, inner protective foam padding to prevent collision damage during long ocean shipping. Test oil will be drained before shipment. We support FOB, CIF, DDP trade terms for bulk wholesale orders. All outer packages have clear labels with OE number, model, gross weight, dimension and fragile warning marks. We can arrange secure fixing inside container for full container orders.

We are a 20-year professional remanufacturing factory for automatic transmissions, exporting products to more than 150 countries. Our monthly production capacity reaches thousands of gearboxes. We own multiple professional dynamometer test benches and a full team of transmission engineers, ready to provide technical support for bulk buyers. We offer multiple product grades to satisfy different market budget demands.

A: Our factory warranty will become invalid under several typical scenarios. First of all, the warranty does not cover damage caused by improper installation, such as failure to reset CVT pressure adaptation after installation. Using non-Honda specified CVT fluid, mixing different oil types or failing to clean the transmission cooler and pipelines thoroughly will also void the warranty, as residual metal debris will quickly scratch pulleys and damage the steel belt. Besides, vehicle overloading, engine coolant leakage into transmission housing, collision damage, modification or ECU tuning to boost engine torque beyond original factory rating are not covered. Tampering, disassembling our remanufactured unit without our written approval will also terminate warranty service. We recommend sharing this notice with your end repair customers in advance.

A: Yes, private labeling service is available for bulk wholesale orders of remanufactured 5LK CVT transmissions. We can print your company logo, your custom part number, product description and your business contact information both on the export wooden crate and the metal identification tag fixed on the transmission housing. Before production starts, you just need to send us your logo vector artwork and required text content, and our design team will make a preview draft for your confirmation. This service has a minimum quantity requirement. For small trial orders, we can stick labels provided by your side instead. This helps you build your own local aftermarket brand, and hide our factory information from your end buyers.

A: We use standard HS code for automatic transmission assemblies for vehicle exports. The HS code will be marked clearly on commercial invoice and packing list for customs declaration. If your destination customs office requests product material statement, non-wood declaration or other supporting paperwork, our document team is able to prepare these certificates for you. We can also issue Certificate of Origin to help you apply preferential tariff treatment in your country. All soft copies of documents will be sent to your email before shipment, while original hard documents can either be sent together with cargo or delivered separately by courier. Our sales team can adjust the product description on documents to match your local customs rules.